ClearOne comm CONVERGE SR 1212 - Manual (Page 233)

228
ACONNLVL – Audible Connect / Disconnect Level
this command selects/reports the audible connect / disconnect indicator’s level.
Command Form : DEVICE ACONNLVL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value signed Float 2 -12.00 – 12.00
(null to query in text) dB
Ad – Auto Disconnect Enable / Disable
this command selects/reports the setting of auto disconnect.
Command Form : DEVICE Ad <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 0 = off
1 = loop Drop
2 = Call progress
3 = loop Drop + Call progress
(null to query in text)
AdCLIP – Audio Clipping
this command reports the channels that are currently clipping their audio signals. This command is read only.
this command is implemented only for inputs.
Command Form : DEVICE AdCLIP [values]
Argument Type Size Values
value Bit map of
Inputs 2 xxxx xxxx xxxx xxxx
|……………………| Input 1 (lsb) to 12 (msb)
|…….| reserved
(null to query in text)
Bit map of
outputs 2 xxxx xxxx xxxx xxxx
|………………………| output 1 (lsb) to 13 (msb)
|….| reserved
Bit map of
processors 2 xxxx xxxx xxxx xxxx
|……………| processor a (lsb) to h (msb)
|--------------| reserved
Bit map of
Faders 1 xxxx xxxx
|------| Faders 1 (lsb) to 4 (msb)
|-------| reserved
Bit map of telco 1 xxxx xxxx
| telco rx
| telco tx
|-----------| reserved