ClearOne comm CONVERGE SR 1212 User Manual
Page 57
52
CONNECT TO A SITE
Connect To a Site
Click the Connect button
on the Console Button Bar, or select Connect from the Connect menu. the
Connect dialog appears as shown below.
Connection options include:
to automatically create a new site file, select the
•
Create New document and Connect to Site radio button
to pull data from the unit to the current site File, select the
•
Pull data from unit to Current document radio
button (only available if a site file is open)
to push data from the current site file to the unit, select the
•
Connect to Site and Push document radio
button (only available if a site file is open the unit is added)
to connect via usB, select the
•
uSB Connection radio button
to connect via Ip, select the
•
IP Connection radio button, and select a unit from the Available Addresses
drop-down list (or enter an Ip address in the Enter Address entry box)
press the Connect button to connect to the site or Cancel to close the dialog.
NOTE: the default login user name is ClearOne. the default password is Converge. user
names and passwords are not case sensitive.
disconnect from a Site
to disconnect from a site, press the disconnect button
on the Console Button Bar, or select Disconnect from
the Connect menu. answer yes to the Confirm dialog that appears, or No to cancel.