ClearOne comm CONVERGE SR 1212 - Manual (Page 232)

227
SERIAL COmmANdS
serial commands are shown in bold, followed by the command form and argument details.
AA – Auto Answer Enable / Disable
this command selects/reports the setting of auto answer.
Command Form : DEVICE AA <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
AAmB – Adaptive Ambient Mode
this command selects/reports the setting of adaptive ambient.
Command Form : DEVICE AAmB <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
AARINGS – Number of Rings to Auto Answer On
this command selects/reports the setting of the number of rings to auto answer.
Command Form : DEVICE AARINGS <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 2 - 4
(null to query in text)
ACONN – Audible Connect / Disconnect Indication
this command selects/reports the status of the audible connect / disconnect indication.
Command Form : DEVICE ACONN <Channel> [value].
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)