ClearOne comm CONVERGE SR 1212 - Manual (Page 277)

272
TE – Telco Enable
this command selects/reports the hook status.
Command Form : DEVICE TE <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
TELCOLVLCTRL – Telco RX Level Control Enable / Disable
this command selects/reports the setting of telco rx level control.
Command Form : DEVICE TELCOLVLCTRL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (t)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
TImELOCALE – Time Locale Settings
this command sets or reports the time locale settings.
Command Form : DEVICE TImELOCALE [Daylightsavings timeZone timeZonename]
Argument Type Size Values units
Daylight savings unsigned Integer 4 0 = Do not use Daylight savings
1 = use Daylight savings
(null to query in text)
time Zone unsigned Integer 4 the number of seconds from uDt. (-86400
– 86400)
time Zone
argument string 32 Description of time zone
TOuT – Time Out Select
this command selects/reports the inactivity time out before returning to the unit title screen on the front panel.
Command Form : DEVICE TOuT [value]
Argument Type Size Values units
value unsigned Integer 4 0 = no time out
1 – 15
(null to query in text) min
uId – Unit ID
this command reports the unit id. This command is read only.
Command Form : DEVICE uId [value]