ClearOne comm CONVERGE SR 1212 - Manual (Page 240)

235
value unsigned Integer 4 1 = master
2 = slave
(null to query in text)
dECAy – Decay Adjust
this command selects/reports the setting of the decay rate.
Command Form : DEVICE dECAy <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 1 = slow
2 = medium
3 = Fast
(null to query in text)
dEFAuLT – Default The Unit
sets the unit to factory defaults. There is no query for this command.
Command Form : DEVICE dEFAuLT
No Arguments
dELAy – Delay Adjust
this command selects/reports the setting of delay time.
Command Form : DEVICE dELAy <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 5 (p)
value unsigned Float 2 0.00 – 250.00
(null to query in text) ms
dELAySEL – Delay Select
this command selects/reports the delay activation of an assignable processing channel.
Command Form : DEVICE dELAySEL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 5 (p)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
dEVICENAmE – Argument Identification Label
this selects/reports the Device argument identification label of the specific channel.
COMMAND FORM : DEVICE dEVICENAmE <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 7
(I, o, m, l)