ClearOne comm CONVERGE SR 1212 - Manual (Page 261)

256
reserved 2 0
OFFA – Off Attenuation Mode
this command selects/reports the off attenuation value of a mic channel.
Command Form : DEVICE OFFA <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned
Float 2 0.00 – 60.00
(null to query in text)
PAA – PA Adaptive Mode
this command selects/reports pa adaptive mode for the specified mic.
Command Form : DEVICE PAA <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
PACEN – PA Softclipper Enable
this command changes enables the softclipper function on a power amplifier channel.
Command Form : DEVICE PACEN <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
value unsigned
short 2 0 = off
1 = on
2 = toggle
(null to query in text)
PAENERGy – PA Energy-saver mode
this command switches the 36-volt rails off and on for the power amplifier. It is intended to be used for a low power
or energy saving mode.
Command Form : DEVICE PAENERGy [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
value unsigned
short 2 0 = energy saver mode oFF (power amp on)
1 = energy saver mode on (power amp off)
(null to query in text)