ClearOne comm CONVERGE SR 1212 - Manual (Page 267)

262
PHONEBOOkCNT – Counts Entries in the Phonebook
this command queries the number of entries in the phonebook. This command is query only.
Command Form : DEVICE PHONEBOOkCNT <value>
Argument Type Size Values units
value unsigned Integer 4 0 – 20
PHONEBOOkdEL – Deletes an Entry in the Phonebook
this command deletes an entry in the phonebook. There is no query for this command.
Command Form : DEVICE PHONEBOOkdEL <label>
Argument Type Size Values units
label string 16 1 – 16 chars
PHONEBOOkREAd – Queries the Phonebook by Index
this command queries an entry in the phonebook. This command is query only.
Command Form : DEVICE PHONEBOOkREAd <Index> [speed number label]
Argument Type Size Values units
Index unsigned Integer 2 0 – 19 (must be less than the number of phone
Book entries)
speed Dial unsigned Integer 2 0 for not assigned to a speed dial
1 – 20
(null to query in text)
number string 44 1 – 44 chars ‘0’ – ‘9’, ‘*’, ‘#’
label string 16 1 – 16 chars
PP – Phantom Power
this command selects/reports the setting of phantom power.
Command Form : DEVICE PP <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
PRESET – Preset Execution/Reporting
this command selects/reports the state of a preset.
Command Form : DEVICE PRESET <Channel> [value]
Argument Type Size Values units
Channel Channel 1 0 (Binary)/null (text) = query last preset ran
see Groups and Channels
group group 1 13 (s)
value unsigned Integer 2 0 = set preset state to off
1 = set state to on and execute if not already on
2 = execute and return state to off
(null to query current state in text)