Comtrol PortVision DX - Manual (Page 103)

PortVision DX User Guide
4. Browse to the SocketServer .cmtl file and then click Open.
5. Click Yes to the Upload Firmware message that warns you that this is a sensitive
process.
It may take a few moments for the firmware to upload onto the DeviceMaster. The
DeviceMaster reboots itself during the upload process.
6. Click Ok to the advisory message about waiting to use the DeviceMaster until the status
reads ON-LINE. In the next polling cycle, PortVision DX updates the Device List pane
and displays the new SocketServer version.
7. You can use the appropriate DeviceMasterand Guide to complete the DeviceMaster
configuration process.
1.
•
NS-Link COM ports - Optionally, refer to the DeviceMaster NS-Link Device Driver
Guide for Windows for detailed information about device driver configuration.
Note: Make sure that you enable the driver ifyou disabled it before
uploadingSocketServer..
•
TCP/IP socket ports - Optionally refer to the SocketServer help system for
additional information.
•
NS-Link tty ports - Refer to the readme file packaged with the device driver.
If the firmware uploads fail and it is on the other side of several switches, a router, or wireless you
can use TFTP to upload SocketServer.
Software Settings
- DeviceMaster LT/PRO/RTS/Serial Hub/500
103