Software settings tab (io-link master) – Comtrol PortVision DX User Manual
Page 54
PortVision DX User Guide
Software Settings Tab (IO-Link Master)
The Software Settings tab provides a way to review,
, and
(configuration file) on an IO-Link Master.
Note: If the Software Settings tab does not appear, that means that the IO-Link Master
is not available for connection. Which could mean that an incorrect user name or
password was entered. Make sure that you initial capitalize the user names,
Admin, User, or Operator.
Differences between the settings on the IO-Link Master and the configuration file are displayed in
green with an asterisk so that you can review the content before applying the changes. For
example:
Buttons (Tools Menu)
Descriptions
Apply Changes
The Apply Changes button only appears if you have loaded a
configuration file that contains settings different from those on the IO-
Link Master.
This saves the configuration file that you are viewing in the Software
Settings tab to the IO-Link Master.
In addition, you must reboot the IO-Link Master to activate any changes
made to the Network Settings tab.
54
IO-Link Master Properties