Comtrol PortVision DX - Manual (Page 104)

PortVision DX User Guide
Checking the Bootloader Version
Use the following procedure to check the Bootloader version.
Note: Typically, you do not update the Bootloader unless instructed by Technical Support
or the ftp (web) site.
1. In PortVision DX, right-click the DeviceMaster in the Device List pane for which you want
to determine the Bootloader version and click Reboot.
2. Click Yes to the Confirm Reboot query.
3. Right-click the DeviceMaster and click Refresh as many times as necessary to catch the
reboot cycle in the Device List pane.
The Bootloader version displays briefly during the reboot cycle before the default
application (SocketServer) loads.
4. You can check the Comtrol ftp site to see if a later version is available.
Note: Although this link goes to the DeviceMaster RTS subdirectory, the firmware for the
DeviceMaster family is the same.
104 Software Settings
- DeviceMaster LT/PRO/RTS/Serial Hub/500