Comtrol PortVision DX - Manual (Page 41)

PortVision DX User Guide
Network Settings Description
•
Static IP Configures the DeviceMaster with the static IP address
information that you provide in the IP Address, Subnet Mask, and
Default Gateway fields.
IP Address
The IP address programmed into the DeviceMaster after applying the
changes and rebooting the DeviceMaster.
See your network administrator for a valid IP address.
The default IP address programmed from the factory is 192.168.250.250.
Subnet Mask
The Subnet Mask is a 32-bit value (255.x.x.x) that enables IP packets to
distinguish the network ID and host ID portions of the IP address.
The default Subnet Mask programmed from the factory is 255.255.0.0.
Default Gateway
The Default Gateway is a TCP/IP configuration item that is the IP address of
a directly reachable IP router.
The Default Gateway programmed from the factory is 192.168.250.1.
Bootloader
Timeout
This option is available if you have installed SocketServer version 9.06 or
higher.
Allows you to change the Bootloader time-out value before the default
application, typically, SocketServer.
You may need to increase this time-out value to 45 for compatibility with
spanning tree devices (normally switches. If you change the time-out value to
0, this prevents SocketServer web page from loading.
Buttons (Tools Menu) Descriptions
Apply Changes Applies the current changes to the DeviceMaster.
Undo Changes
Undoes all the changes only, if you have not applied it to the
DeviceMaster.
Help Opens page-level help for this screen.
Close
Closes the window and queries you as to whether you want to save the
settings to a file or not if you made changes and did not click Apply
Changes.
You can disable this query using the Options... screen in the Tools menu
(Ask for confirmation on closing Properties screen item).
DeviceMaster LT/PRO/RTS/Serial Hub/500 Properties
41