Software settings tab – Comtrol PortVision DX User Manual
Page 139
Advertising
PortVision DX User Guide
Software Settings Tab
Use the following procedure to load a configuration file from the Software Settings tab.
1.
If you have not done so, access the Properties screen for the device for which you want
to load the configuration.
2.
Click the Software Settings tab.
3.
Click Load Settings from a File, browse to the location of the configuration file, click the
file name, and then Open.
4.
Click the All checkbox or click only the properties that you want to load for each property
category in the configuration file and click Done.
5.
Click Apply Changes.
6.
Click Close to exit the Software Settings tab.
Note: PortVision DX does not send it to the device unless you click Apply Changes.
Configuration Files - DeviceMaster
139
Advertising