Uploading bootloader – Comtrol PortVision DX User Manual
Page 112
PortVision DX User Guide
Uploading Bootloader
Typically, do not upload the Bootloader unless advised to by Technical Support (or the ftp site).
Note: Do not attempt to upload firmware across a wifi connection.
Technical Support recommends connecting the DeviceMaster UP directly to a PC or laptop when
uploading Bootloader. You may also want to connect the DeviceMaster UP to a UPS while
uploading Bootloader to avoid any power interruption. A power interruption while loading
Bootloader will require that you send the DeviceMaster UP back to Comtrol for repair.
Note: Only upload Bootloader to one DeviceMaster UP at a time.
1.
Make sure that you have downloaded the
latest version
.
2.
Right-click the DeviceMaster UP in the Device List pane for which you want to update,
click Advanced and then Upload Firmware.
112
Firmware - DeviceMaster UP