Comtrol PortVision DX - Manual (Page 38)

PortVision DX User Guide
The Properties screen also provides:
• Tools menu provides an alternate method to apply or undo changes, save settings to or
load configuration settings from a file (if applicable), and reboot the Comtrol Ethernet
attached product.
•
Documentation menu links you to the latest documentation for your product.
•
What’s This help for the connectors in the graphic of the hardware, which can be used
when you connect cables or to determine the meaning of the LEDs for all Comtrol
products.
Refer to the appropriate Comtrol Ethernet attached product Properties screen for detailed
information.
•
DeviceMaster (DeviceMaster LT | PRO | RTS | Serial Hub | 500)
•
DeviceMaster UP
•
IO-Link Master
•
RocketLinx
•
Other hardware
What's This Help Feature
The product pictures in the Properties screen provide hardware information about:
• LEDs
• Port connectors
• Cabling and signal information
• Power requirements
• If applicable to the product, DI/DO, alarms and DIP switches
To use the What’s This help feature in the Properties screen, use this procedure.
1. Double-click the Comtrol Ethernet attached product in the Device List pane or right-click
the device and select Properties.
2. Right-click the connector in the graphic for which you want information, highlight the
What’s This popup, and then click the link.
The image above may not reflect your actual product.
38 User Interface Overview