Comtrol PortVision DX User Manual
Page 95
PortVision DX User Guide
4.
Click the appropriate
•
DHCP IP to use the IO-Link Master with DHCP. Contact the Network Administrator
to provide the MAC address of the IO-Link Master and ask if you should change the
Subnet Mask, or Default Gateway values.
•
Static IP to program a static IP address and enter the appropriate values for your
site.
5.
After entering the changes, click Apply Changes.
6.
Click Close.
7.
After programming the network information, you need to verify that you have the
version of software (images and applications)
loaded before performing any other
configuration procedures.
You can use the Web Interface tab to configure IO-Link Master settings or you can use the
feature. Optionally, you can modify IO-Link Master settings using the
tab if you are familiar with the parameters.
Network Configuration
- IO-Link Master
95