Comtrol PortVision DX - Manual (Page 43)

PortVision DX User Guide
Buttons (Tools Menu) Descriptions
Apply Changes Applies the current changes to the DeviceMaster.
Undo Changes
Undoes all the changes only, if you have not applied it to the
DeviceMaster
Save Settings to a File
Allows you to save the current configuration of this DeviceMaster in
a file. All network and SocketServer (if applicable) settings are
saved.
A Field Selection pop up appears so that you can select appropriate
configuration values.
Optionally, you can use the Save button or the Save Configuration
option in the Device menu on the Main screen, if you want to save
specific portions of the configuration.
Load Settings from a
File
Loads a previously saved DeviceMaster configuration file.
A Field Selection pop up appears so that you can select appropriate
configuration values.
You must click Apply Changes before the changes are saved to the
DeviceMaster.
Help Opens page-level help for this screen.
Close
Closes the window and queries you as to whether you want to save
the settings to a file or not if you made changes and did not click
Apply Changes.
You can disable this query using the Options... screen in the Tools
menu (Ask for confirmation on closing Properties screen item).
DeviceMaster LT/PRO/RTS/Serial Hub/500 Properties
43