Comtrol PortVision DX - Manual (Page 96)

PortVision DX User Guide
RocketLinx
Use the following procedure to program network information into a single RocketLinx at a time.
You can optionally, program multiple RocketLinx switches at the same time.
Note: For initial configuration, the RocketLinx must be on the same network segment.
1. Highlight the RocketLinx for which you want to program network information and access
the Properties screen using one of these methods:
•
Double-click the RocketLinx in the Device Tree or Device List.
•
Right-click the RocketLinx in the Device Tree or Device List and click Properties.
•
Highlight the RocketLinx in the Device Tree or Device List, click the Properties
button.
•
Highlight the RocketLinx in the Device Tree or Device List, click the Manage menu,
and then Properties.
2. If necessary, enter the user name and password.
3. Optionally, change the Device Name. The default Device Name is the last three pairs of
numbers from the MAC address.
Note: The MAC Address field is automatically populated when the RocketLinx is
discovered during a scan.
4. Optionally, enter the serial number of the RocketLinx in the event that you require it later.
Note: The Device Status field displays the same status as the Main screen.
96 Network Configuration
- RocketLinx