Comtrol PortVision DX - Manual (Page 106)

PortVision DX User Guide
4. Browse to the Bootloader .cmtl file, and then click Open (Please locate the new
firmware), and then click Yes (Upload Firmware).
5. It may take a few moments for the firmware to upload onto the DeviceMaster. The
DeviceMaster reboots itself during the upload process.
6. Click Ok to the advisory message about waiting to use the DeviceMaster until the status
reads ON-LINE.
Note: Make surethat you enable the driver if you disabled it before uploading the
Bootloader..
106 Software Settings
- DeviceMaster LT/PRO/RTS/Serial Hub/500