Checking image and application versions – Comtrol PortVision DX User Manual
Page 115
PortVision DX User Guide
For example, a subassembly with version 1.10.3 was tested with application base version 1.10.
When using this page or PortVision DX, an application subassembly can install only if its version
number matches that of the installed application base assembly. A subassembly with a version of
1.20.2.4 will only install if the application base version is 1.20. It will not install on a device with
application base version 1.09 or 1.20.
Application
Subassemblies
Description
application-manager
The Application Manager version loaded on the IO-Link Master.
configuration-manager The Configuration Manager version loaded on the IO-Link Master.
discovery-protocol
The Discovery Protocol version loaded on the IO-Link Master.
ethernetip
The EtherNet/IP version loaded on the IO-Link Master.
event-log
The Event log version loaded on the IO-Link Master.
iolink-driver
The IO-Link version loaded on the IO-Link Master.
web-user-interface
The web interface version loaded on the IO-Link Master.
Firmware - IO-Link Master
115