Comtrol PortVision DX - Manual (Page 94)

PortVision DX User Guide
IO-Link Master
Use the following procedure to program network information into a single IO-Link Master at a
time.
Note: For initial configuration, the IO-Link Master must be on the same network segment.
1. Highlight the IO-Link Master for which you want to program network information and
access the Properties screen using one of these methods:
•
Double-click the IO-Link Master in the Device Tree or Device List.
•
Right-click the IO-Link Master in the Device Tree or Device List and click Properties.
•
Highlight the IO-Link Master in the Device Tree or Device List, click the Properties
button.
•
Highlight the IO-Link Master in the Device Tree or Device List, click the Manage
menu, and then Properties.
2. If necessary, enter the user name and password. In the event that you need to type the
user names, remember that they are case-sensitive (Admin, Operator, and User).
3. Optionally, change the Device Name. The default Device Name is the last three pairs of
numbers from the MAC address.
Note: The MAC Address and Serial Number fields are automatically populated if the IO-
Link Master was discovered during a scan. The Device Status field displays the
same status as the Main screen.
94 Network Configuration
- IO-Link Master