Overview, 1 key features, 2 available options and accessoires – Flintec FT-11D User Manual
Page 6
FT-11(D) Technical Manual, Rev. 1.35 November 2010
Page 6 of 52
3. Overview
The type FT-11(D) weight indicator is an economic and powerful state-of-the-art instrument. The accurate and
versatile instrument is available in different housings, meeting the industries demand for various environmental
conditions. FT-11(D) is approved by Weights & Measures Authorities for use in Accuracy Class III applications
with up to 10 000 intervals according to OIML R76. It has a large 6 digit LED weight display (red, 20 mm or 14
mm high) with weight status information. With a variety of interface options the FT-11(D) weight indicators are
the perfect fit to weighing systems and process control systems.
3.1 Key
Features
FT-11D
FT-11
EU Type approved for 10 000 intervals
Yes
Yes
Single or dual range
Yes
Yes
Approved sensitivity 0.4
V/e
Yes
High internal resolution up to 8 000 000 counts
Yes
Yes
Display resolution up to 60 000 counts
Yes
Yes
Maximum conversion rate of 100/s
Yes
Adaptive digital filter for fast and stable reading
Yes
Yes
High resolution display mode
Yes
Yes
Up to 6 load cells (350 ) or 18 load cells (1100 )
Yes
Up to 10 digital load cells (DLC); 16 if externally powered
Yes
Automatic eccentricity adjustment
Yes
Realtime clock
No
No
Standard Serial interface RS232C
Yes
Yes
Integrated AC power supply
Yes
Yes
Zeroing with one button & Taring with one button
Yes
Yes
Auto-zero tracking and auto-zero at power-up
Yes
Yes
Motion detection
Yes
Yes
Printout in different formats incl. header and footer
Yes
Yes
Isolated digital inputs / outputs
Option
Option
Setpoint monitoring (3 setpoints, digital I/O required)
Yes
Yes
Key lock option to prevent unauthorized access
Yes
Yes
3.2 Available Options and Accessoires
FT-11D
FT-11
Alibi memory for up to 149 764 weighing results
Yes
Yes
Additional serial interface RS232C
Yes
Yes
Additional serial interface RS232C / 20 mA TTY CL / RS485
Yes*
Yes*
Modbus RTU
No
Yes
Ethernet TCP/IP and Modbus RTU over Ethernet
No
Yes
Profibus DP-V0 & DP-V1
No
Yes
ProfiNet
No Yes
CANopen No
Yes
Analogue output 0 – 10 V and 4 – 20 mA
No
Yes
Binary data output (17-bit code)
No
Yes
Digital inputs / outputs
3x / 3x
3x / 3x
12 V DC (12…17 V DC) power inlet
No
Yes
24 V DC (20…27 V DC) power inlet
No
Yes
Rechargeable battery (for 230 V AC version only)
No
Yes
Flintec IndFace Software
No
Yes
* 20 mA TTY CL not for stainless steel housing