Futaba 3PKS - Manual (Page 14)

14
B
e
fo
re
Using
After opening the box, first check if the contents conform to the following. The contents
depend on the set as shown below.
Set Contents
Transmitter T3PKS
RF module
PK-FSM or PK-FM
*Installed in transmitter.
Receiver R303FHS(HRS/PPM) or R203HF(HRS-FM) or R113iP(PCM)
Miscellaneous
Transmitter Ni-cad battery pack NT8F700B
or Battery box
*Installed in transmitter.
Receiver switch
Wheel ofset adapter(APA)
Instruction manual
Mini screwdriver
* It is used for PK-FMS or R303FHS.
- If any of the set contents are missing, or you have any questions, please contact your
dealer.
ｉ Caution
ｅ When using the T3PKs in the high response system (HRS) mode, always use it under the follow-
ing conditions:
Receiver: R203HF, R303FHS or other high response system (HRS) compatible receiver
Servos : 6V Futaba digital servo
Battery : 6V NiCd battery
Transmitter mode : HRS mode (See p.42 for setting method.)
If the conditions are different, control is impossible.
And Fail Safe Unit (FSU) is not available.
ｅ Always use only genuine Futaba transmitters, receivers, servos, FET amps (electronic speed
controls),Nicad batteries and other optional accessories.
Futaba will not be responsible for problems caused by the use of other than Futaba genuine parts. Use the parts speci-
fied in the instruction manual and catalog.