Futaba 3PKS - Manual (Page 91)

Modified model # and model
name
Model # and model name cur-
rently operating
Model # and model name to be
modified
D i s p l ay s " D PAC " w h e n t h e
CAMPac-16K is installed in the
transmitter.
(Screen displaying the DataPac models)
Model No.
M1~M20 :Model memory in the
Transmitter
E21~E30 :Model memory in the
CAMPac-16K
91
F
u
nction
Model Selection "M-SEL"
1
(Model No. selection)
Select the model No. by (JOG) button up, down, left, or right
operation. The DataPac models are displayed from the cur-
sor position of "M1" to "M5" on
the top row of the transmitter
model by (JOG) button up op-
eration or from the cursor posi-
tion of "M16" to "M20" on the
bottom row of the transmitter
model by (JOG) button down
operation.
The same operation is performed
when the transmitter model is
displayed from the DataPac
model.
- The model No. and model name of the model to be modified are dis-
played at the bottom right-hand side of the screen.
2
(Model selection execution)
Press the (+) and (-) keys
simultaneously for about 1
second. The set beeps and the
model is selected.
- When the model # and model name at the bottom left-hand side of the
screen change, model selection is complete.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Using the model selection function
Model selection set button
- (+) and (-) buttons pressed
simultaneously for about 1 sec-
ond.
Model selection button
- Select the model by (JOG) button
up, down, left, or right operation.