Futaba 3PKS - Manual (Page 84)

84
F
u
nction
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Timer selection
First, select the type of
timer at the "TYPE" item.
The setup screen varies
depending on the type of
timer. This figure shows the
UP TIMER setup screen.
Timer Function "TIMER"
- Read the later descriptions for the operation method by type.
(Preparation)
Assign the "LAP START" switch using the function select
switch (p.79). When resetting by switch, assign "LAP RESET"
also.
1
(Racing timer type selection)
Select the setting item "TYPE" by (JOG) button up, down,
left, or right operation. Press the (+) or (-) button and set the
racing timer type.
Timer selection (TYPE)
UP TIMER
: Up timer
DOWN TIMER : Down timer
LAP MEMORY : Lap timer
LAP NAVIGATE : Navigate timer
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Racing timer type selection
Time display
Minute display (m)
Second display (s)
1/100 second display
While the TIMER function is operating, T I M is displayed on the initial screen and
menu screen.
Operation display
Setup item selection
- Select by (JOG) button up,
down, left or right operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.