Installation, Receiver and servo connections – Futaba 3PKS User Manual
Page 29
Advertising
Switch
Steering servo
Throttle servo
CH3 servo
To Battery
Receiver
29
Inst
al
lation
Connect the receiver and servos as shown below. Connect and install the receiver and
servos in accordance with "Installation Safety Precautions" on the next page.
The figure shown below is an example. The method of connecting the motor controller to
the motor and battery depends on the motor controller used. Purchase the motor control-
ler and servos separately. The receiver also depends on the set.
Installation When An Motor controller Is Used
Installation For Gas Powered Models
Installation
Receiver and Servo Connections
Advertising