Futaba 3PKS - Manual (Page 55)

Setup items
RATE
:Forward side rate
TG.P :Curve switching
point
FWD-TYP :Forward side curve
selection
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up or down operation.
55
F
u
nction
(Preparation)
- Select "VTR" at setup item "FWD-TYP".
-Select setup item "RATE" and make the following adjustments:
1
Forward side adjustment
Use the (+) button to adjust at + side when you want to
quicken the rise and use the (-) button to adjust the - side
when you want to make the rise milder.
2
Curve switching point adjustment
When you want to change the curve switching point relative
to the throttle trigger, select the setting item "TG.P" by (JOG)
button up or down operation, and use the (+) and (-) buttons
to move to the point you want to set.
3
Brake side adjustment
Select the setting item "BRAKE" by (JOG) button up or down
operation. When you want to quicken the rise, use the (+)
button to adjust the + side and when you want to make the
rise milder, use the (-) button to adjust the - side.
4
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Adjustment method for VTR curve
Throttle EXP "THEXP"
Adjustment range
RATE :-100 ~ 0 ~ +100%
FWD-TYP :EXP, VTR, CRV
TG.P
:20 ~ 80%
BRK-EXP :-100 ~ 0 ~ +100%
For the VTR curve, only the
high side can be set. The
b r a ke b e c o m e s t h e E X P
curve.
Switching point
A ve r t i c a l c u r s o r l i n e t h a t
shows the cur ve switching
point is displayed on the setup
screen graph.
Curve type Select button
- Select with the (+) or (-) but-
tons.
Adjust buttons
Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value:
RATE and BRK-EXP "0"
TG.P "50"