Brake mixing "brake, Fu nction – Futaba 3PKS User Manual
Page 70
Brake mixing mode : ON
3rd channel brake-A.B.S : ON
70
F
u
nction
(Opening Screen)
MENU 1
Press t
he
button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he
button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Brake Mixing "BRAKE"
- When braking, mixing is applied to 2nd channel 3rd channel.
- 3rd channel brake rate, delay amount, 3rd channel brake-EXP and 3rd channel
brake-A.B.S possible.
Operation
The function select dial function can control 3rd channel brake rate (BKRT), delay
amount (DLY), and 3rd channel brake-A.B.S return amount (ABP) ...etc setting using
button trim DL1, DL2, DL3 or digital trim DT3 etc. (See page 80)
When BIGCAR is selected on the "MENU-T" function (See page 95), brake rate
(BKRT) adjustment is automatically assigned to dial DL3.
Dial / Trim Setting
It is possible to adjust the Brake Return Amount (ABP), Delay Amount (DLY) and Cy-
cle period (CYC) exclusively for the front brake (the 3rd CH). In doing so, you can use
the A.B.S. Function at the front side even if the A.B.S Function is off for the rear brake
(2nd CH). You can use the same procedure as the 2nd CH A.B.S Function for setting
the Cycle Period (CYC), Duty Ratio (DTY) and Steering Mixing (STM). Use SW1,
SW2, SW3 to switch the 3rd chnnel A.B.S. function ON/OFF.
3rd chnnel A.B.S.
Brake Mixing "BRAKE"
(Throttle, 3rd channel system)
Use this mixing when the front and rear brakes must be adjusted independently such as
1/5GP cars, etc. This mixing uses the 2nd channel to control the rear brakes and the 3rd
channel to control the front brakes.
Setup items
MODE
: Function ON/OFF
BKRT
: 3rd channel brake rate
EXP
: 3rd channel brake-EXP
DLY
: Delay amount
CH3ABS : Function ON/OFF
ABP
: CH3ABS brake return
amount
DLY
: CH3ABS Delay amount