Futaba 3PKS - Manual (Page 82)

82
F
u
nction
Timer Function "TIMER"
Timer Function "TIMER"
Use the timer by selecting one of the four timers UP TIMER, DOWN TIMER, LAP
TIMER and LAP NAVIGATE timer.
UP TIMER function
- The UP TIMER can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch
is operated and accumulates the time between each start and
stop. (When the count reaches 99 minutes 59 seconds, it re-
turns to 00 minutes 00 seconds and repeats the count.)
- The first start operation can be linked to the throttle trig-
ger.
- An alarm sound can be set. The passage of time is announced by sounding of a buzzer
(beeps) each minute after starting.
- Alarm: Generates a beep at the set time (minutes).
- Prealarm: Alarm advance announcement sound. Sounding starts the set time (seconds) before the
alarm. (beeps)
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.
DOWN TIMER function
- The DOWN TIMER can be used to count the time between start and stop, etc. (The
time remaining is displayed.)
- Start and stop are repeated at each switch operation and
the time between each start and stop is counted down and
displayed. The start time becomes the alarm set time.
(When the count reaches 00 minute 00 second, the down
timer operates like an up timer.)
- The first start operation can be linked to the throttle trigger.
- An alarm sound can be set. The passage of time is announced by sounding of a buzzer
(beeps) each minute after starting.
- Alarm: Generates a beep at the set time (minute).
- Prealarm: Alarm advance announcement sound. Sounding starts the set time (seconds) before the
alarm. (beeps)
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.