Futaba 3PKS - Manual (Page 97)

97
F
u
nction
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
Direct Call Selection Button "DCALL"
1
7
8
2.3.4.5.6
Setup items
1: Function assigned to button No. 1
2: Function assigned to button No. 2
3: Function assigned to button No. 3
4: Function assigned to button No. 4
5: Function assigned to button No. 5
6: Function assigned to button No. 6
7: Function assigned to button No. 7
8: Function assigned to button No. 8
1
(Direct button selection)
Select the setting item (direct button No.1~8) by (JOG) but-
ton up or down operation.
2
(Assignment function selection)
Select the assignment function by pressing the (+) or (-) but-
ton.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Direct selection function assignment
The setup screen of this function is called by pressing the
(DIR) button for 3 seconds or longer from the initial screen.
However, when the setup screen was called by this method,
return to the initial screen by pressing the (END) button and
(DIR) button one time each, in that order.
•Select the setting item by but-
ton
* blinks at the current setup item.
Function setting button
- Set with the (+) and (-) buttons.
- Press the (+) and (-) buttons si-
multaneously. Function assign-
ment returns to the initial value
in about 1 second.
Direct button selection
- Select by (JOG) button up or
down operation.