Futaba 3PKS - Manual (Page 15)

15
B
e
fo
re
Using
*The switches, dial, and trimmers in the figure are shown in the initial setting position.
Antenna
Precautions when turning the power
switch on and off.
When the data was changed using the edit keys or trim levers,
wait at least two seconds before turning off the power. If the
power is turned off within two seconds after the data was
changed, the new data will not be written to memory.
Digital Dial 3
(DL3)
Mechanical ATL
adjusting screw
Throttle
trigger
See page 17
for ajastment instructions.
Power
switch
Digital Trim 2(DT2)
(default throttle trim)
See page 16 for operating instrucxtions.
Grip Handle
Digital Trim1(DT1)
(default steering trim)
See page 16 for operating instrucxtions.
Digital Trim 3(DT3)
See page 16 for operating instructions.
Digital Dial 1(DL1)
(default dual rate)
See page 16 for operating instrucxtions.
Steering
wheel
Push switch 2 (SW2)
Push switch 1 (SW1)
Push
switch 3
(SW3)
LED LCD screen
Edit buttons
Display switch
Sound port
Use a commercial earphone
with 3.5mm diameter plug.
Nomenclature
Transmitter T3PKS
Digital Dial 2(DL2)
(default ATL)
See page 16 for operating instrucxtions.