Futaba 3PKS - Manual (Page 72)

72
F
u
nction
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Boat Mode "BOAT"
Steering side EPA function, STEXP function, STSPD function, or D/R function setting
also affects channel 3 side operation. However, the channel 3 servo is not reversed by
setting the steering side reverse function.
Affect of set value of other functions on tilt mixing
Shutting off brake side operation
When brake side operation is unnecessary with a boat, etc., it can be shut off.
Tilt mixing
Tilt mixing uses an outboard engine and applies bidirectional mixing from rubber (steer-
ing) to channel 3 and from channel 3 to rudder so that with a boat rubber operation and
tilt mixing operation can be performed by 2 servos.
Tilt mixing can be performed by rudder operation by steering wheel and 3rd channel.
Brake side operation (TRG-BRK)
NORMAL, CUT OFF
Brake side operation shutdown function
Tilt mixing function
1
(Shutting down brake side operation)
Select the setting item “TRG-BRK” by (JOG) button up or
down operation. Use the (+) or (-) button to select "CUT
OFF".
"NORMAL" :Normal trigger operation
"CUT OFF" :Trigger brake side operation shut down
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Prohibiting brake side operation
Boat Mode "BOAT" (Steering, Throttle, system)
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
Setup item selection
- Select by (JOG) button up or
down operation.