Futaba 3PKS - Manual (Page 74)

F50/B50 F70/B30
74
F
u
nction
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
Throttle Mode "THMOD"
This function allows selection of the forward side and brake (reverse) side operation ratio
from 70:30 or 50:50 by changing the neutral position of the throttle servo.
When "Cut OFF", which prohibits trigger brake side operation, was set in the boat mode
(p.72), the neutral position does not change even if the throttle mode is changed because
brake side operation is shut off.
When "TRG-BRK" was set to "CUT OFF" by boat mode function
1
(Throttle mode selection)
Select "F50/B50" or "F70/B30" by (+) or (-) button.
"F50/B50" =Forward 50% : Back50%
"F70/B30" =Forward 70% : Back30%
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Selecting the throttle mode
Setup items
TYPE
: Foward side / Brake side
5 : 5 7 : 3
Foward side Brake side
Throttle mode (TYPE)
F50/B50, F70/B30
Throttle Mode "THMOD" (Throttle system)
Foward side Brake side
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.