Futaba 10CG 2.4GHz User Manual
Page 83
83
SPOILER MIX
(GLID
PRYHVWKHVSRLOHU V E\ÀLSSLQJWKHDVVLJQHGVZLWFKDQGLVXVHGWRPDNHVWHHSGHVFHQWV$QGSPOILER
MIX
works linking with BUTTERFLY function.
Adjustability:
• Position: -100% to +100%, with a default of -50% (off), +50% (on)
• Channel: Spoiler 1: ch8, 5 or 3 (ch8 or 3*), Spoiler 2: NULL, ch5 or 3 (NULL or ch3*)
*GLID (2A+2F) mode
• Elevator setting: Rate: -100% to +100%, Delay: 0% to 100%
• SWITCH A-H fully assignable. Also LOGIC SW (Lsw1 to 3) may be assigned. Set up LOGIC SW: See p. 38.
GOAL of EXAMPLE:
STEPS:
INPUTS:
2-servo spoiler mode.
Adjust the spoiler servo position to
60%
.
Open the SPOILER MIX function and
move to 2nd page.
for 1 second. (If BASIC,
again.)
C
to SPOILER MIX.
to 2nd page.
Activate the function.
C
to MIX.
to ON.
Assign the SPO2-CH. (Ex: CH3)
C
to SPO2-CH.
to CH3.
Adjust the spoiler servo position.
(Ex: SPO1
SPO2=+55% to +60%)
C
to +50%. (SPO1)
to +60%.
C
to +50%. (SPO2)
to +60%.
Optional: Set the elevator rate.
(EX: 10%)
C
to rate-ELE.
to 10%.
Optional: Set the delay. (EX: 25%)
C
to dly-ELE.
to 25%.
Close menu.
Where next?
Set up BUTTERFLY mixing: see p. 87.