Futaba FX-40 - Manual (Page 12)

12 <Before Use>
• Compact Flash Memory card - CFDP 32M Data-Pack increases your model, music file, voice file,
and picture image file storage capability, and allows you to transfer model settings to another FX-40
transmitter.
• LT4F5000 Transmitter battery pack - the (5000mAh) transmitter Li-ion battery pack may be easily
H[FKDQJHGZLWKDIUHVKRQHWRSURYLGHHQRXJKFDSDFLW\IRUH[WHQGHGÀ\LQJVHVVLRQV
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by
placing the instructor on a separate transmitter. Note that the FX-40 transmitter may be connected to
another FX-40 system, as well as to any other models of Futaba transmitters. The FX-40 transmitter
uses the newer “Micro” rectangular type cord plug. Both Micro- to-Micro and Micro-to-round plug style
trainer cords are available.
‡<KDUQHVVHVVHUYRH[WHQVLRQVHWF*HQXLQH)XWDEDH[WHQVLRQVDQG<KDUQHVVHVLQFOXGLQJDKHDY\GXW\
version with heavier wire, are available to aid in your larger model and other installations.
• Gyros - a variety of genuine Futaba gyros are available for your aircraft or helicopter needs.
‡*RYHUQRU *9 IRUKHOLFRSWHUXVH$XWRPDWLFDOO\DGMXVWVWKURWWOHVHUYRSRVLWLRQWRPDLQWDLQDFRQVWDQW
head speed regardless of blade pitch, load, weather, etc.
• DSC Cord - allows setup and testing without transmitting. With your Transmitter and Receiver off, plug
cord into trainer port then, into the receiver Battery/DSC (B/C) slot. All programming and setup may be
done in this manner without transmitting.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for
PCM-G3, PCM1024, or FM/PPM types are available.)
The following additional accessories are available from your dealer. Refer to a Futaba catalog for
more information: