Interlogix Simon XT Installation Manual - Manual (Page 20)

14 Simon XT Installation Manual
Function Default Delete Range Access
code Installer
settings
Edit sensors D, I
Reporting menu
Report options
Opening reports Off Off On/Off D, I
Closing reports Off Off On/Off D, I
Forced armed Off Off On/Off D, I
AC power failure
report Off Off 5 to 254 minutes,
off D, I
Low CPU battery
report On Off On/Off D, I
Sensor alarm restoral
report Off Off 1 to 3, Off D, I
24-hour sensor
tamper report Off Off On/Off D, I
Supervisory/ tamper
report Off Off On/Off D, I
No usage Off Off 2 to 254 days, Off D, I
Swinger shutdown On Off On/Off D, I
Programming report Off Off On/Off D, I
Fire alarm verification Off Off On/Off D, I
Report communication modes
Phone 1 report mode Off Off All SIA, All CID,
Alarms SIA,
Alarms CID,
Nonalarm SIA,
Nonalarm CID,
Backup SIA,
Backup CID,
Voice dialer, or
Off D
Phone 2 report mode Off Off D
Phone 3 report mode Off Off D, I
Phone 4 report mode Off Off D, I
Timers menu
Latchkey time None None 12:00 midnight to
11:59 PM, None D, I, M
Entry delay 30 seconds 30 seconds 30 to 240 seconds D, I
Exit delay 60 seconds 45 seconds 45 to 254 seconds D, I
No activity timeout Off Off 2 to 24 hours, off D, I
Auto phone test Off Off 1 to 254 days, off D, I
Supervisory time Midnight None 12:00 midnight to
11:59 PM, None D, I