Interlogix Simon XT Installation Manual - Manual (Page 53)

Simon XT Installation Manual 47
Touchpad options
Table 19 below describes the Touchpad Options menu.
Table 19: Touchpad Options menu
Function Default Description
Keyfob no delay Off Determines whether a key fob arms the system with no
delay (on), or not (off). When this feature is on, you must
disarm the system before entering the premises, since it is
disabling the entry delay. If the remote touchpad arming
option is on, key fobs cannot disarm the system and will
cause an alarm upon entering.
Panic alarms On Determines whether the panel panic buttons (police,
auxiliary, and fire) activate alarms when pressed (on), or not
(off).
Remote TP arm Off Determines whether key fobs and remote touchpads can
disarm the system only during exit and entry delays (on), or
arm and disarm the system anytime (off). If this option and
the key fob no delay option are on, you cannot enter and/or
disarm using remote touchpads without causing an alarm.
System options
Table 20 below describes the System Options menu.
Table 20: System Options menu
Function Default Description
RF jam detect Off Determines whether the panel checks for and reports RF
interference/jam to the central station (on), or not (off). If this
option is on and the panel receives a constant 319.5 MHz
signal, the panel reports the condition to the central station. If
this option is off, the panel does not detect an RF jam.
Demo mode Off Determines whether the panel operates as a demonstration
model (on) or a standard panel (off). Turning on this feature
disables low battery supervision and allows the microphone to
remain on continuously during an AVM session. With this
option on, the panel is not testing battery supervision.