Interlogix Simon XT Tabletop Installation Manual - Manual (Page 10)

Chapter 1:
4 Simon XT TableTop Control Panel Installation Manual
Device Description
Carbon monoxide
(CO) alarm (60-
652-95) Th e Learn Mode™ CO alarm alerts users to hazardous levels of carbon
monoxide gas. If dangerous concentrations of gas are present, the red
indicator light comes on, the internal siren goes off, and an alarm is
transmitted to the panel. The panel sounds its own alarm and reports to the
central station.
Keyfob (60-659) The keyfob (keychain touchpad) lets you turn the system on and off from
right outside the home or activate a panic alarm if there is an emergency. If
you have X10 lamp modules, you can use keyfobs to turn all system
controlled lights on and off.
ELM (encrypted
learn mode) keyfob
(60-832) The ELM (encrypted learn mode™) 2-button keyfob is an alkaline battery-
powered, wireless touchpad that allows users to arm and disarm their
system, and activate a police or auxiliary panic alarm. Random encrypted
signal transmissions provide high security to help prevent signal copying.
Remote handheld
touchpad (60-671) The remote handheld touchpad lets you turn the system on and off while in
the home, turn system controlled lights on and off (all or individual lights), or
activate a panic alarm if there is a nonmedical emergency.
Simon XT Table
Top Touchpad (80-
924-3-XT-TT) The touchpad lets you turn the system on and off while in the home, turn
system controlled lights on and off (all or individual lights), or activate a
panic alarm if there is a nonmedical emergency.
Water-resistant
personal help
button (60-906-95) The water-resistant personal help button is a wireless device used for
activating police or auxiliary alarms through your system. When the help
button is pressed, the light mounted under the cover will blink and an alarm
signal is transmitted.
Caution: Do not use outdoor motion sensors for intrusion protection.
Standard panel
Table 2 describes the basic panel (out-of-box) hardware capabilities.
Table 2: Panel hardware capabilities
Hardware Capability
Power Input for an AC step-down, plug-in style transformer.
One siren output,
up to two zone
inputs Terminals for connecting hardware sirens or normally closed (NC) loop
switch circuits.
Phone line
connection Allows panel to communicate with central monitoring station and/or remote
phone.
Inspect the package and contents for visible damage. If any components are
damaged or missing, do not use the unit; contact the supplier immediately. If you
need to return the unit, you must ship it in the original box.