Interlogix Simon XT Tabletop Installation Manual - Manual (Page 44)

Chapter 4:
38 Simon XT TableTop Control Panel Installation Manual
3. The system displays each entered access code digit as an asterisk. Press
Enter.
The panel is now in program mode.
Note: Do not remove panel power while in program mode.
Table 9: Simon XT TableTop Control Panel programming codes
Code Description
Dealer
code You can use the dealer code to program all system options, including high-security
options that are not accessible with the installer code if it is different from the dealer
code. Depending on how the access code is set, the default dealer access code is
654321, 54321, 4321 (factory default), or 321. This code can be used for all
programming.
Installer
code Depending on how the access code is set, the default installer code is 654321,
54321, 4321 (factory default), or 321. This code is limited to changing all but the
following: Dealer code, Code length, Downloader code, Phone lock, Phone #1,
Phone #2, Phone 1 report mode, Phone 2 report mode, HW 1 function.
Access codes
Table 10 below provides access code option details.
Table 10: Access codes
Function Default Description
Dealer code 4321 You can use the dealer code to program all system options,
including high-security options that are not accessible with the
installer code if it is different from the dealer code. Changing the
dealer code to differ from the installer code will prevent the
installer from viewing certain fields.
1. Change the dealer code.
2. Enter program mode with the installer code.
3. Installer should no longer be able to see the following:
Code length, Downloader code, Phone lock, Phone #1, Phone #2,
Phone 1 report mode, Phone 2 report mode, HW1 function.
Installer code 4321 You can use the installer code to program most installer options,
except for high-security dealer options.
Master code 1234 Master arm/disarm code.
Master code able to enter user programming and bypass sensors.
User codes 1 to
8 Blank Regular arm/disarm code.
Duress code Blank Use in place of master or user code to cause a silent alarm.
Code length Four digits Code can be three to six digits long.