Interlogix Simon XT Tabletop Installation Manual - Manual (Page 47)

Chapter 4:
Simon XT TableTop Control Panel Installation Manual 41
Function Default Description
Sup protest Off Determines whether the panel protests arming if it has not
received a supervisory signal from any sensor 15 minutes before
arming (on) or not (off).
Note: This feature must be turned off for US installations.
Phone numbers
Table 12 below provides phone number option details.
Table 12: Phone numbers
Function Default Description
Phone # 1 Blank Lets you program up to a 26-digit central monitoring station
receiver/voice event notification phone number for monitored systems.
Phone digits can be 0-9, *, #, or a pause (P).
To delete the phone number, press Disarm while editing a phone digit.
To add a pause to the phone number press Bypass. Pressing Enter is
required if you enter fewer than 26 digits.
Phone # 2 Blank
Phone # 3 Blank
Phone # 4 Blank
Downloader # Blank Lets you program up to a 26-digit phone number for the Enterprise
Downloader.
Phone options
Table 13 below provides phone option details.
Table 13: Phone options
Function Default Description
Man phone test On Determines whether the user can perform a manual
communication test to verify communication to a central
station/voice dial (on), or not (off). If you have all 4 phone #
programmed it should send a test report to all 4 before showing
that test is okay.
FTC On Determines whether the panel and interior sirens sound trouble
beeps if it is unable to successfully send a report to a central
station (on) or not (off).
DTMF dial On Determines whether the panel uses DTMF (on) or pulse (off) for
dialing programmed phone numbers.
300 bps enabled On Determines whether the baud rate used by the panel for central
station communication is 300 bps (on) or 110 bps (off).