Cadence Telephony - Manual (Page 125)

115
TelOper: the Web Browser Desktop Interface
Dial the next party to be added to the call, using either your telephone keypad or the Name list, Number
box, and Dial button in this page. Once connected, this button will change to Add to Conference. Click
on Add to Conference to bring your original caller into this new call. The button on this page will
change back to Set up Conference.
To add a fourth party to the call, click on Set up Conference again, then dial the fourth party and click
on Add to Conference after the call is established.
• Call Waiting. If you have call waiting enabled for your extension and you hear a Òbeep-beepÓ tone
while in the middle of a conversation, you can use this button to pick up the incoming call and place your
current caller on hold. You can then use the Swap Hold button to transfer between the two.
• Call Barge-in. If you have barge-in privileges, you can select an extension from the Name list, then click
on this button to barge into an existing call on that extension.
Using the Ring Group button
This button can be used as an alternative to entering the Pick Up Ring Group command sequence from
your telephone. See Pick up on page 43 in the chapter Telephone Operations for details on ring groups.
Clicking on the Ring Group button brings up a page similar to the following:
To use this page, pick up your phone, select the pickup group you want to pick up from the pull-down list,
then click on the Pick Up Group button.
FIGURE 6-3. A Ring Group page
* 0
user.bk Page 115 Wednesday, March 7, 2001 10:34 AM