Cadence Telephony - Manual (Page 136)

User’s Guide
126
To bring up this information, click on View Log in the Control page. This will bring up a Web page with a
format similar to the following sample page:
The call log feature uses three 1 Mbyte files in a round-robin fashion. When CallLogA gets full, the program
starts filling CallLogB. When that gets full, information goes in CallLogC. When that gets full, CallLogA is
wiped out and restarted. You can use the pull-down list in the upper left corner of this window to select
between the logs available. The system automatically selects the latest call log when you open the screen.
The filters can be used to reduce the amount of information shown in the call log. When these fields are
blank, all calls in the currently-selected call log are displayed. By entering either whole phone numbers or
substrings of numbers, you can reduce the display to just the information in which you are interested. For
example, to show only calls made from 752 to anywhere, set the filters to
From filter: 752
To filter: (blank)
then click on the Reload Log button.
To enter more than one telephone number or substring in a field, separate the numbers with the “pipe” char-
acter “|”. For example, to show all calls made from extension 743 to either extension 120 or 152, type in
FIGURE 6-8. A sample Call Log page
user.bk Page 126 Wednesday, March 7, 2001 10:34 AM