Cadence Telephony - Manual (Page 30)

User’s Guide
20
To disable call waiting at your extension:
1. Pick up any phone or otherwise get an inside line dial tone.
2. Enter the Disable Call Waiting sequence .
3. Enter your extension number.
4. If prompted, enter your password
1
, or a password with administrator privileges.
5. If your password was accepted, you will be notified that call-waiting has been disabled.
6. Hang up.
The NexPath Telephony Server’s default configuration allows a phone to ring 20 seconds before being for-
warded, or 20 seconds before being sent to voice mail or getting disconnected, though your system adminis-
trator can alter these times. If you do not pick up a waiting call and you have set up call-forwarding for your
extension, a waiting call will forwarded after 20 seconds. If you do not have call-forwarding enabled but do
have a voice mailbox, then after 20 seconds the waiting call will go to your voice mailbox. If you have nei-
ther call-forwarding enabled nor voice mail, then after the 20-second delay time has expired, the caller will
be notified that there is no one to take the call and the call will be disconnected.
1. You will not be asked for a password if you have already entered it once to enable some other command and you have not
hung up since then.
* 5
user.bk Page 20 Wednesday, March 7, 2001 10:34 AM