Cadence Telephony - Manual (Page 79)

69
Windows Desktop Tools- NexPath Dialer
4. If you are defining a new configuration, click inside the System Name box, then type in the system
name assigned to your NexPath Telephony Server. If your system name is not available from DNS
(Domain Name Service), or in the
\Windows\Hosts file, then you must type in the IP address of the
NexPath Telephony Server instead.
5. Add your extension number and password to the boxes in this screen. The extension number is the
number of the extension that you are controlling next to your computer. The password is a valid pass-
word on the NTS Server. The password must be the password of a user that owns, or has permission to
control, the extension you have typed in the extension box. The owner of an extension has permission
to control it, and any user with administrative privileges has permission to control any extension. If you
enter the password of a user that does not have permission to control this extension, you will get a con-
nection error.
6. If desired, you can also specify the extension numbers of up to three voice mailboxes that will be moni-
tored. If there is any unread voice mail in any of these voice mail boxes, an indicator will flash indicat-
ing new messages. The first voice mailbox in the list is the one that a call is sent to if the button Send to
VM is clicked when a call is ringing in. If you do not wish to be notified of any voice mail, or send calls
to voice mail, these entries may be left empty.
7. The password you use must have access to voice mail boxes, in order for the voice mail window to
allow access.
8. Click OK when done.
user.bk Page 69 Wednesday, March 7, 2001 10:34 AM