Carrier Access Access Bank II SNMP - Manual (Page 159)

14-14 9/24/01
ring - ringback to fx chans (def)
tone - 1KHz tone to fx chans
ringback to fx ... > ds1 d1 send equipment
................. > ds1 d1 send equipment ring
tone to fx ....... > ds1 d2 send equipment tone
equipment ............ Display the Equipment List
event ................ Display the next 18 events
all ................ Display the entire Event Log
clear .............. Clear the Event Log
first .............. Display the first 18 events
exit ................. Exit Command Line Interface
ip ................. Display/Set IP Parameters
addr ipaddr ........ Set IP Addr ddd.ddd.ddd.ddd
dhcp on|off ........ Set DHCP Enable
gateway ipaddr ..... Set Gateway Addr ddd.ddd.ddd.ddd
get “string” ....... Set Get Community String
mask ipaddr ........ Set Subnet Mask ddd.ddd.ddd.ddd
nms1 ipaddr ........ Set NMS1 Trap Addr ddd.ddd.ddd.ddd
nms2 ipaddr ........ Set NMS2 Trap Addr ddd.ddd.ddd.ddd
nms3 ipaddr ........ Set NMS3 Trap Addr ddd.ddd.ddd.ddd
set “string” ....... Set Set Community String
trap “string” ...... Set Trap Community String
kill ................. Kill Connection Assignments
s:c|vm|r1 [n] [i] .. All Span Connection Definitions:
s - span name: T1 = d1,d2...and FX = f1,f2...
c - channel number: 1...
n - number of channels to kill, default 1 for a single
channel
i - channel increment, default 1,
2 means every other channel, etc.
vm - V.35 span, m = 1...
r1 - User Data RS-232 span
s:c - half cnct, T1 or FX channel
All connections .... > kill all
FXO on f2 .......... > kill f2
Second half T1#1 ... > kill d1:13 12
All V.35#1 ......... > kill v1
log ................. Display/Set log enables
all on|off ......... Set all log enables
sys ................ Display/Set system log enables
power on|off .. Hard reset or power on detected
brownout on|off .. Brown out detected
reset on|off .. Soft reset detected
vn ................. Display/Set log enables for V.35 #n
rts on|off . Loss of V.35 RTS
llb on|off . Local Loop Back detected
v54 on|off . Remote V.54 Loop Back detected
dn ................ Display/Set log enables for ds1 #n