Carrier Access Access Bank II SNMP User Manual

Page 39

Advertising
background image

4-2

9/24/01

order) with 0, 1, or 2 analog interface cards, Access Bank II - SNMP Remote Monitor software for
the PC, and a power conversion cube. The package also contains one modular Category 5 T1 network
interface cable, a 25-pin local management cable, a 25-pin to 25-pin null modem adapter, a 25-pin to
9-pin straight adapter, and “rabbit ear” adapter brackets with screws for wall or 19-inch rack-mount-
ing. You will also find enclosed a copy of this manual along with a product warranty registration
card.

Check the contents of the shipping carton against the Packing Materials List.

Inspect the Access Bank II - SNMP for signs of damage, and report any damages to the
shipper.

Retain all packaging materials in case you need to ship or relocate the unit.

Table 4-1: Access Bank II - SNMP Packing Materials List

Description CAC

Part

No.

Items Included With Access Bank II - SNMP Purchase

Access Bank II - SNMP equipped according to customer order with 0,
1 or 2 line interface voice cards

Access Bank II - SNMP Remote Monitor MS Windows

based Soft-

ware for the PC (5 Disk Set)

019-0035 Release 2.0

“Rabbit Ear” wall/rack mounting adapter brackets (4) with screws

004-0015

115Vac/60Hz to -48Vdc Power Conversion Cube with 5-foot 16 AWG
grounded wall plug power cord and alternate 8-foot DC connector
cord

003-0016r

One (1) 10-foot modular category 5 T1 network interface cable, RJ-
48C to RJ-48C, for connecting Access Bank II - SNMP to T1 network,
or to a PBX D&I port.

005-0009

RS-232 local management cable (10 ft) for managing the Access Bank
II - SNMP using a directly attached computer through the RS-232
management port.

005-0003-DCE-MF-10

25-pin male to 25-pin male null modem adapter (10 ft) for connecting
Access Bank II - SNMP to an external modem through either the local
mgt. cable or the optional dual RS-232 data and mgt. cable.

005-0002-25M-25M-Null
Modem

RS-232 25-pin male to 9-pin female straight adapter (10 ft) for
directly connecting the Access Bank II - SNMP to a 9-pin computer
device through either the local management cable or the optional dual
RS-232 management cable.

005-0007-25M-9F-
Straight

Access Bank II - SNMP Installation and User’s Manual

002-0071

Warranty registration card

AB-II-WC

Optional Items

Additional category 5 T1 network IF cables, RJ-48C to RJ-48C, 10 ft

005-0009

Advertising