Chapter 6 basic configuration, 1 about this chapter, 2 connecting to the access bank – Carrier Access Access Bank II SNMP User Manual
Page 62: Chapter 6, 1 about this chapter -1, 2 connecting to the access bank -1, Initialization and basic configuration
About This Chapter
9/24/01
6-1
Chapter 6
Initialization and
Basic Configuration
Contents of This Chapter:
6.1 About This Chapter
This chapter describes how to initialize and configure the Access Bank II - SNMP for first time basic
operation in Local mode.
6.2 Connecting to the Access Bank
Connect to the Access Bank II - SNMP Management cable using a terminal (or terminal emulation
program) set for 9.6 Kbps, 8, 1, None. The steps below guide you from factory defaults through the
standard TCG configuration. In this guide, the italicized items are what you type in. End each com-
mand line with the Enter key.
About This Chapter .................................... 1
Connecting to the Acces Bank ................... 1
Configuring the Access Bank ..................... 2