Carrier Access Access Bank II SNMP - Manual (Page 166)

Command Line Interface (CLI)
9/24/01 14-21
14.4.4.8 craft
Use the craft command to set and display all options of the craft port. This command allows the user
to customize the craft (management) interface for communication parameters and for remote and dia-
lout access.
14.4.4.9 date
Use the date command to set date in the format shown: This date is used for time stamping alarms
and events in the system.
Operations Type Comments
To display all
connections connections Displays all connections and group
definitions.
To display bypass
connections connections bypass Displays only bypass connections
between spans. A Bypass connection
is a nailed up configuration and
doesn’t utilize the switch state logic.
Operations Type Comments
To set the baud rate to
9.6 craft baud b9600 Sets the Baud rate to 9.6 KBps
To set bit data size 7 bit
data craft data bit7 Sets the data size to 7 bits
To set parity to even craft parity even Sets the parity to Even
To display Help craft ?
Operations Type Comments
To configure the clock for
the current date
date 10:13:97