Carrier Access Access Bank II SNMP - Manual (Page 170)

Command Line Interface (CLI)
9/24/01 14-25
14.4.4.20 name
Use the name command to set or display names of circuit IDs, session prompt, and system name.
14.4.4.21 password
Use the password command to change the password.
14.4.4.22 ping
Use the ping command, to test whether or not the management node or other network devices are
reachable on the network.
Operations Type Comments
To make bypass for
group v1 in ds1 #2
channels 1 and 2 make bypass v1 d2:1 2 Configures a v.35 data connection on
channels 1 and 2 of T1 #2
To make group
assignment for group b in
fxs #2 channels 1 to 12 make group b f2:1 12 Configures voice card channels 1..12
to group B.
To display Help make ?
Operations Type Comments
To set citcuit id for span s name circuitid s “id” d1, d2, f1, f2, v1, etc.
To set the session prompt
to a required string name prompt “prompt”
To set the system name name system “name”
Operations Type Comments
To change the password password “password”