Carrier Access Access Bank II SNMP - Manual (Page 63)

6-2 9/24/01
Figure 6-1: The AB-II SNMP in an Example Network
6.3 Configuring the Access Bank
1. Start the system and connect the terminal. The system displays:
Booting...
Configuring to restored configuration...
- Setting channel types
- Setting signal types
- Setting connections
- Setting ds1 configuration
- Setting I/O configuration
- Setting V.35 configuration
- Setting RS-232 Data Port
- Setting APS configuration
- Setting APS threshold
- Setting log enables
- Removing any data loopbacks
+++AT&FE1V1X4&D0&S0S=1
Enter <ESC> to login:
2. Press the <ESC> key. The display then reads:
ABII
SNMP
Key
System
Unit
Management
Station
Router
PC PC
LAN
V.35
FXS
RS-232
Service
Provider
T1 Þ ESF/B8ZS
10baseT
SNMP
Access
12 FXS Voice
Channels
768 Data
to V.35
12
24 0
T1