Cisco 15327 - Manual (Page 207)

13-7
Ethernet Card Software Feature and Configuration Guide, R7.2
Chapter 13 Configuring VRF Lite
Monitoring and Verifying VRF Lite
Gateway of last resort is not set
C 192.168.50.0/24 is directly connected, POS0.1
Example 13-8 Router_B customer_a VRF Routing Table
Router_B# sh ip route vrf customer_a
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
C 192.168.4.0/24 is directly connected, FastEthernet0.1
O 192.168.1.0/24 [110/2] via 192.168.100.1, 00:56:24, POS0.2
C 192.168.100.0/24 is directly connected, POS0.2
Example 13-9 Router_B customer_b VRF Routing Table
Router_B# show ip route vrf customer_b
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
C 192.168.200.0/24 is directly connected, POS0.3
C 192.168.5.0/24 is directly connected, FastEthernet1.1
O 192.168.2.0/24 [110/2] via 192.168.200.1, 00:10:51, POS0.3
Monitoring and Verifying VRF Lite
Table 13-1 shows the privileged EXEC commands for monitoring and verifying VRF Lite.
Table 13-1 Commands for Monitoring and Verifying VRF Lite
Command Purpose
Router# show ip vrf Displays the set of VRFs and interfaces.
Router# show ip route vrf vrf-name Displays the IP routing table for a VRF.
Router# show ip protocols vrf vrf-name Displays the routing protocol information for a VRF.
Router# ping vrf vrf-name ip ip-address Pings an ip address that has a specific VRF.